Monsoon Panniers 3
The Monsoon 3 Panniers is made from Enduristan's 3-layer fabric, a supreme high-tech material. The outer layer of extremely abrasion resistant polymer protects your belongings whilst the inner layer is made of high visibility red vinyl. In between a 1000D Nylon mesh is embedded. The mesh is densely woven yet flexible to allow the 1000D Nylon filaments to align in the direction of the stress for maximum tear resistance.
Enduristan uses the toughest buckles available on the market. How do we know? Because we tested them! We use the same family buckles for all of our products - for a maximum compatibility.
Thought-out functionality, attractive design and ergonomics are key to outstanding products for us. The Swiss product development office Flink is known for innovative solutions and was awarded with numerous international design awards - that‘s why we develop our products together with Flink.
Fully waterproof 3-layer fabric, a zipper covered back and a welded construction: The Monsoon 3 Panniers is 100% waterproof.
ROKstraps are heavy duty stretch straps invented in Australia. The core is 100% natural rubber for best elasticity and tear resistance above 100kg - protected by a polyester braiding for superior UV and wear resistance.
1: WEAR PROTECTION: The outermost layer of the 3-layer fabric is made up of heavy duty polymer which acts as superior wear protection. An all-welded design makes the Monsoon 3 even tougher.
2: TEAR PROTECTION: The middle layer consists of 1000D Nylon mesh which is densely woven yet flexible to allow the 1000D Nylon filaments to align in the direction of the stress.
3: WATER PROTECTION: The innermost layer of the 3-layer fabric is made out of red vinyl for perfect visibility and 100% waterproofness. Unlike hard panniers, the roll top closure does not permanently bend in a crash, keeping your items fully waterproofed.
4: IMPACT PROTECTION: At the front, underneath and rear we have added high impact plastics to protect the contents of your bags from loose gravel and surprise branches.
VOLUME LENGTH x WIDTH x HEIGTH
2 x 30 Liter 36 cm 2x 25 cm x 33 cm
• 2 fold-away separators per bag: Fold them in to divide your bag,
fold them away to have one large compartment
• Holds up to 6 isolation bags (separately available)
• Red inner lining for high visibility
• 2 rows of cargo loops per bag to attach additional gear
• Ergonomic soft grip handles
• Deluxe shoulder strap separately available
• 3 compression straps per bag
• Attaches firmly for even the most extreme off road riding
• Bags can move away in case you drop your bike thanks to the
use of ROKstrap components
• Easy fastening, quick removal
• Distance between bags adjustable between 21 and 75cm
• Fore-aft placement fully adjustable
• No flapping straps
• Washable and easy to clean
• Built to last
• Inferno Heat Shield to keep your panniers away from the heat
of your muffler
• Frame Mount Kit to install Monsoon 3 on a flat set of pannier
• Deluxe Shoulder Strap with premium ergonomics (one per
• Isolation Bags to keep the contents of your Monsoon 3
Panniers even better organized
• XS Base Packs to add some additional volume to your
Monsoon 3 panniers
MOUNTING WITHOUT FRAMES
Monsoon 3 fits many bikes without frame, thus keeping the bike narrow and the weight close to the centre. Always take care to keep a safe distance to hot parts of the exhaust system and keep Monsoon 3 well out of hot exhaust gases. We suggest using one or more of our Inferno Heat Shields.
BMW - G 650 GS
640 Enduro / 640 Adventure
HONDA - XRV 650 Africa Twin
SUZUKI- DR 650
KAWASAKI - KLR 650
DUCATI - Hypermotard
MOUNTING WITH PANNIER FRAMES
If you use pannier frames, Monsoon will also fit bikes with very small or no mudguards on the sides, such as the BMW F 800 GS. For a secure mount we offer a kit, containing two additional ROKstraps.